Stanley FATMAX SBI810 Original Instructions Manual page 9

To select forward rotation, push the forward/reverse
u
slider (2) to the left.
To select reverse rotation, push the forward/reverse slider
u
to the right.
To lock the tool, set the forward/reverse slider into the
u
centre position.
Screwdriving / nut setting
Select the appropriate bit / socket for the screw or nut to
u
be driven.
Select forward or reverse rotation as described above.
u
Hold the tool in line with the fastener.
u
Press the trigger (1)
u
After tightening, check torque with a torque wrench.
u
LED work light
The LED work light (6) is activated automatically when
the trigger is depressed. The LED work light will illuminate
when the trigger is partially depressed, before the unit
begins running.
Hints for optimum use
Screwdriving
Always use the correct type and size of screwdriver bit.
u
If screws are difficult to tighten, try applying a small
u
amount of washing liquid or soap as a lubricant.
Always hold the tool and screwdriver bit in a straight line
u
with the screw.
Maintenance
Your STANLEY FATMAX tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior.
Protecting the environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
(Original instructions)
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Voltage
V
DC
No-load speed
-1
Min
Beats BPM
Max. torque Nm
(PTI Method)
Chuck mm
capacity
Weight
kg
Charger
Input Voltage 220-240
V
AC
Output Voltage
V
DC
(20V MAX)
Current A
Battery SB201
Voltage
18V
V
DC
(20V MAX)
Capacity Ah 1.5
Type
Li-Ion
SERVICE INFORMATION
STANLEY FATMAX offers a full network of company-owned
and authorized service locations. All STANLEY FATMAX
Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the STANLEY FATMAX location
nearest you or visit us at www.stanleytools.com.
ENGLISH
18V (20V MAX)
0.9 (without battery)
SC125 SC200
220-240 220-240
18V 18V
(20V MAX) (20V MAX)
1.25 2
SB202 SB204
18V 18V
(20V MAX) (20V MAX) (20V MAX)
2.0 4.0
Li-Ion Li-Ion
SBI810
0 - 2 800
0 - 3 500
180
6.35 (Hex)
SC400
SC401
18V
4
SB206
18V
6.0
Li-Ion
9