Managing Oap Clients; Restarting An Oap Client; Shutting Down An Oap Client; Displaying And Maintaining Oap - H3C S10500 Series Configuration Manual

Managing OAP clients

IMPORTANT:
This feature is available on the following modules:
• LSU1FWCEA0
• LSUM1WCMX20RT
• LSUM1WCMX40RT
You can restart or shut down an OAP client.

Restarting an OAP client

Step
1. Enter system view.
2. Restart an OAP client.

Shutting down an OAP client

This feature applies only to OAP clients on Linux.
To shut down an OAP client:
Step
1. Enter system view.
2. Shut down an OAP client.

Displaying and maintaining OAP

IMPORTANT:
This feature is available on the following modules:
• LSU1FWCEA0
• LSUM1WCMX20RT
• LSUM1WCMX40RT
Execute displaycommands in any view.
Task
Display the summary registration information
of OAP clients.
Display OAP client information.
Command
system-view
oap client rebootclient-id
Command
system-view
oap client closeclient-id
Command
display oap client summary [ client-id ]
display oap client info [ client-id ]
7