Setup; Part Names And Functions; Led Indicator - Panasonic KX-HNP100C Installation Manual

Setup

Part names and
functions
B
C
Power supply plug

LED indicator

Battery cover
DC jack
M
Used to register the backup
battery to the hub.
10
HNP100C_(en_en)_0729_ver.030.pdf
D
A
E
N
For assistance, visit www.panasonic.ca/english/support
10
LED indicator
You can use the LED indicator to
confirm the backup battery's status.
Indicator Status
Off The battery is fully
charged
Green, lit Battery power is
being consumed
Green, Registration mode
blinking slowly (you pressed and
held M
Red, lit Backup battery is
out of range of the
hub
Red, blinking No battery, or
slowly device error
Amber, lit Battery is charging
Note:
R The backup battery consumes
battery power whenever it is not
connected to the power outlet. To
keep the backup battery charged
and ready with the maximum
amount of backup power, we
recommend you keep it connected
to a power outlet at all times.
R When the battery operating time
seems to be shorter, even after I
fully charged the battery:
– Clean the battery ends (
and the charge contacts with a
dry cloth and charge again.
– It is time to replace the battery.
N)
, )
2015/07/29 14:11:25