General Product Information; General Information About The Backup Battery; Power Outage Notification By Phone - Panasonic KX-HNP100C Installation Manual

General product information

General information
about the backup
battery
The backup battery can provide power
to your Home Network System devices
(one device per backup battery),
allowing your devices to continue to
operate in the event of a power outage.
Instead of connecting an AC adaptor to
your hub, camera, etc., the backup
battery is connected to your device and
is also connected to the power outlet.
During normal operation, the backup
battery uses power from the power
outlet to charge the battery and to
supply power to the connected device.
In the event of a power outage, the
device is powered by the backup
battery only.
You can register the backup battery
to the hub and take advantage of
other features, but note that the
backup battery does not need to be
registered in order for it to supply
power to the connected device in the
event of a power outage.
Backup battery performance
When the supplied battery is installed
in the backup battery, you can expect
the following operating time in the
event of a power outage.
8
HNP100C_(en_en)_0729_ver.030.pdf
For assistance, visit www.panasonic.ca/english/support
8
Compatible Operating
*1
devices time
Hub (KX-HNB600) 1.5 hours
(standby,
connected to 4
cameras, not
connected to a
Wi-Fi
Indoor Camera 2.0 hours
(KX-HNC200) (standby)
1.5 hours
Outdoor Camera
(standby, when
(KX-HNC600)
night vision
mode is active)
Indoor Siren 7 hours
(KX-HNS105) (standby)
*1 At the time of printing. Additional
compatible devices may become
available at a later date.
*2 All times are approximate.
Power outage
notification by phone
In the event of a power outage, the
backup battery can trigger the hub to
call a pre-programmed phone number
and notify you of the power outage. In
order to use this feature, the following
items are required.
– The hub must be connected to your
landline (refer to the System Setup
Guide included with the hub).
– The backup battery must be
registered to the hub (page 14).
– You must use the [Home Network]
app to program the phone number
that will be called in the event of a
power outage. For more information,
refer to the User's Guide
(page 15).
*2
®
network)
2015/07/29 14:11:25