Abbott FreeStyle Libre 2 User Manual page 58

Step
For disinfection, use a second bleach wipe to wipe all outside
3
surfaces of the Reader until they are wet. Make sure liquid
does not get into the test strip and USB ports. Allow the
Reader surfaces to remain wet for 60 seconds.
4 Dry with clean paper towel to remove any residual moisture.
5 When finished, thoroughly wash your hands with soap and
water.
105
DOC40703_rev-K_manual.indd 105-106 DOC40703_rev-K_manual.indd 105-106
Action
IMPORTANT: If you require assistance or if you notice any signs
of deterioration on the Reader (such as clouding or crazing on the
display of the Reader, corroding or eroding of the plastic housing, or
cracking of plastic housing or display) or if the Reader does not turn
on, discontinue use of the Reader and contact Customer Service at
1-855-632-8658. Customer Service is available 7 Days a Week from
8AM to 8PM Eastern Standard Time.
CAUTION: Do NOT place the Reader in water or other liquids.
Avoid getting dust, dirt, blood, control solution, water, bleach,
or any other substance in the test strip or USB ports as this may
cause the Reader to not function properly.
Maintenance
The System has no serviceable parts.
Disposal
This product should be disposed of in accordance with all applicable local
regulations related to the disposal of electronic equipment, batteries,
sharps, and materials potentially exposed to body fluids.
Contact Customer Service for further information on the appropriate
disposal of system components. Customer Service is available at
1-855-632-8658 7 Days a Week from 8AM to 8PM Eastern Standard Time.
106
3/19/21 9:13 AM 3/19/21 9:13 AM