DT-ATSC-QAM-8V2 Manual
Time / NTP Server Setup
Use the time tab to set the units system time and time zone and NTP Server.
1. Select time tab on system setup page
2. Select time zone from the drop-down tool
3. Enter NTP Server 1 / 2 addresses as required
4. Select synchronize system with PC clock as required
5. Select apply to apply all changes
Administration
Reboot
Use the
Reboot
button to reboot the device. No parameters will be changed.
Reset to Default
Use the Reset to Default button to reset all parameters to original factory settings.
17