General Information
E444xAU Option H37
Description
Description
The E444xAU Option H37 provides a kit to reduce the level of residuals in the 37 kHz
range by 10 dB and can be installed into any PSA instrument. Before installing the
Option H37 kit, measure the residual amplitude in the 37 kHz range.
This manual incorporates the installation of the following similar instrument models
E4440A, E4443A, E4445A, E4446A, E4448A with Option H37. The are referred to as
E444xAU through out this document.
Verifying the Shipment
Inspect the shipping container. If the container or packing material is damaged, it should
be kept until the contents of the shipment have been checked mechanically and electrically.
If there is physical damage please notify the nearest Agilent Technologies office. Refer to
"Contacting Agilent" on page
18. Keep the damaged shipping materials (if any) for
inspection by the carrier and an Agilent Technologies representative.
2
Installation Guide