Front Panel - Agilent Technologies E444xAU Option H37 Installation Manual

E444xAU Option H37

Front Panel

NOTE Keep all of the hardware (screws, nuts, etc.) for re-use when installing the
assemblies.
1. Remove the front panel (7 screws).
2. Disconnect the green Ext Trigger Input cable on the Analog IF Assembly (P1) and the
front panel ribbon cable.
Figure 5 Front Panel
3. Remove the front panel shield (11 screws).
Figure 6 Front Panel Shield Removal
2
3
4
5
Installation Guide
11
10
6
General Information
Installation Procedure
1
9
7 8
7