Install Vent Tube Extension - Telma TL113005 Installation Manual

2.3 INSTALL VENT TUBE EXTENSION

•
At the time of installation the plastic vent tube extension kit should be attached to the grease chamber vent tube
according to the instructions supplied. Install the vent tube before the retarder bracket is installed to avoid the
possibility of crimping the nylon tube and restricting the outlet. The vent tube is located at the upper passenger
side corner of the Telma. Cut off the vent tube at the bottom of the Telma using a knife or cable cutter. Do not use
diagonal cutters which may crimp and restrict the outlet. Do not wrap the vent tube under the retarder.
Page 5 of 30__________________________________________________________________________17feb12jh
Ford E-350/450 Cutaway Installation Manual with Telma Control Module (TRCM)
TL113005