Install The Chassis Brackets - Telma TL113005 Installation Manual

2.2 INSTALL THE CHASSIS BRACKETS

•
Remove any bolts such as battery box and/or exhaust hanger mounts or other components that may interfere with
the chassis bracket mounting.
•
Clamp the chassis bracket (TIB03127) against the frame rail at dimension X1 from the body mount hole and
dimension T1 from the outside top of the frame. If T1 is 4.5", the chassis bracket will be against the inside bottom
lip of the frame rail.
•
Drill three 9/16" holes in each frame rail using the chassis bracket as a template and secure with bolts (TIF03001),
nuts (TIF03003), and lock washers (TIF03005) included in the kit.
•
Tighten the 9/16" bolts to 150 lb-ft (±10%).
•
Drill through the chassis bracket any holes needed for battery box and/or exhaust hanger mounts and reinstall the
original bolts and components that were removed previously.
•
Refer to the figure below for details.
Page 4 of 30__________________________________________________________________________17feb12jh
Ford E-350/450 Cutaway Installation Manual with Telma Control Module (TRCM)
TL113005