Asus H97-PRO Manual page 34

8. USB 2.0 connectors (10-1 pin USB910, USB1112, USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
48 Mb/s connection speed.
H97-PRO
H97-PRO USB2.0 connectors
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
9. Intel ® Serial ATA 6 Gb/s connectors (7-pin SATA6G_56, SATAEXPRESS)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
H97-PRO
H97-PRO Intel
1-20
PIN 1
® SATA 6 Gb/s connectors
you use both connectors, the system automatically detects the devices connected
to these connectors and set a higher priority to M.2 Socket 3 than SATAEXPRESS
interface. Refer to section 3.6.3 PCH Storage Configuration of this user guide for
more details.
devices.
USB910 USB1112 USB1314
PIN 1 PIN 1
Chapter 1: Product introduction