Asus H97-PRO Manual page 22

Hide thumbs Also See for H97-PRO:

Table of Contents

Memory configurations

sockets.

1-8

excess memory from the higher-sized channel is then mapped for single-channel

operation.

CPU spec, DIMM voltage below 1.65 V is recommended to protect

the CPU.

or more memory on the motherboard, the actual usable memory for the OS can be

about 3GB or less. For effective use of memory, we recommend that you do any of the

following:

Use a maximum of 3GB system memory if you are using a 32-bit Windows

Install a 64-bit Windows

motherboard.

For more details, refer to the Microsoft

com/kb/929605/en-us.

(Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).

(SPD), which is the standard way of accessing information from a memory module.

Refer to section 3.5 Ai Tweaker menu for manual memory frequency adjustment.

memory load (4 DIMMs).

we recommend that you install memory modules of the same version or data code

(D/C) from the same vendor. Check with the vendor to get the correct memory

modules.

chipset limitation, DDR3 1600 MHz and higher memory modules on XMP

mode will run at the maximum transfer rate of DDR3 1600 MHz.

OS when you want to install 4 GB or more on the

support site at http://support.microsoft.

Chapter 1: Product introduction

OS, when you install 4GB

OS.

Table of Contents