Installing The Cpu; Installing The Memory - Gigabyte GA-Z270-Gaming K3 User Manual

1-3

Installing the CPU

Make sure that the motherboard supports the CPU.
Always turn off the computer and unplug the power cord from the power outlet before installing the
CPU to prevent hardware damage.
Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may
Apply an even and thin layer of thermal grease on the surface of the CPU.
of the CPU may occur.
standard requirements for the peripherals. If you wish to set the frequency beyond the standard
card, memory, hard drive, etc.
Installing the CPU
Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
LGA1151 CPU Socket
Alignment
Key
Pin One Corner of the CPU Socket
Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load
plate automatically during the process of re-engaging the lever after you insert the CPU.
1-4

Installing the Memory

Make sure that the motherboard supports the memory. It is recommended that memory of the same
capacity, brand, speed, and chips be used.
Always turn off the computer and unplug the power cord from the power outlet before installing the
memory to prevent hardware damage.
Memory modules have a foolproof design. A memory module can be installed in only one direction.
If you are unable to insert the memory, switch the direction.
Channel memory mode will double the original memory bandwidth.
Please visit GIGABYTE's website for details on hardware installation.
Notch
Alignment
Key
Triangle Pin One Marking on the CPU
- 9 -
LGA1151 CPU
Notch