Gigabyte GA-Z270-Gaming K3 User Manual page 36

Power On By Mouse
Allows the system to be turned on by a PS/2 mouse wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Move Move the mouse to turn on the system.
ErP
Note: When this item is set to Enabled
PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.
Soft-Off by PWR-BTTN
button is pressed for less than 4 seconds, the system will enter suspend mode.
Power Loading
Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing
it to shutdown or fail. If this occurs, please set to Enabled. Auto
Resume by Alarm
If enabled, set the date and time as following:
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
RC6(Render Standby)
Allows you to determine whether to let the onboard graphics enter standby mode to decrease power
- 36 -