Gigabyte GA-Z270-Gaming K3 User Manual page 40

Installing the SATA RAID/AHCI Driver and Operating System
With the correct BIOS settings, you are ready to install the operating system.
Installing the Operating System
As some operating systems already include Intel
performance and compatibility. If the operating system to be installed requires that you provide additional SATA
1. Copy the IRST folder under \Boot in the driver disk to your USB thumb drive.
2. Boot from the Windows setup disk and perform standard OS installation steps. When the screen requesting
you to load the driver appears, select Browse.
3. Insert the USB thumb drive and then browse to the location of the driver. The locations of the drivers are
as follows:
4. When a screen as shown, select Intel Chipset SATA RAID Controller and click Next to load the driver and
continue the OS installation.
3-2 Drivers Installation
After installing the operating system, insert the motherboard driver disk into your optical drive. Click
Run
install. You can click the Xpress Install
the arrow icon to individually install the drivers you need.
Please visit GIGABYTE's website
for more software information.
®
Please visit GIGABYTE's website
for details on configuring the audio
software.
- 40 -