Chapter 3 Appendix - Gigabyte GA-Z270-Gaming K3 User Manual

Chapter 3 Appendix
RAID Levels
RAID 0
Minimum
Number of Hard
Array Capacity Number of hard
drives * Size of the
smallest drive
Fault Tolerance No
Before you begin, please prepare the following items:
Windows setup disk.
Motherboard driver disk.
A USB thumb drive.
A. Installing SATA hard drive(s) in your computer
motherboard. Then connect the power connectors from your power supply to the hard drives.
Steps:
1. Go to
SATA Mode Selection to Intel RST Premium With Intel Optane System Acceleration. Then
save the settings and restart your computer.
2.
The BIOS Setup menus described in this section may differ from the exact settings for your motherboard.
The actual BIOS Setup menu options you will see shall depend on the motherboard you have and
the BIOS version.
C-1. Using EZ RAID
Steps:
1. After restarting the computer, enter the BIOS Setup and go to Peripherals
2. Go to the Mode
move to the Create tab. Click Proceed to begin.
3.
drive.
RAID 1
2
Size of the smallest (Number of hard
drive
the smallest drive
Yes
(To ensure optimal performance, it is recommended that you
®
, make sure SATA Controller(s) is enabled. To create
Type
- 38 -
RAID 5 RAID 10
4
(Number of hard
smallest drive
Yes Yes
EZ RAID
RAID Volumes