Gigabyte GA-Z270-Gaming K3 User Manual page 39

Steps:
1. In BIOS Setup, go to BIOS and set Windows 8/10 Features to Windows 8/10 and CSM Support to Disabled.
Save the changes and exit BIOS Setup.
2. After the system reboot, enter BIOS Setup again. Then enter the Peripherals\Intel(R) Rapid Storage
Technology sub-menu.
3. On the Intel(R) Rapid Storage Technology
Create RAID Volume
under the Name
4. Under Select Disks
The stripe block size can be set from 4 KB to 128 KB. Once you have selected the stripe block size, set the
volume capacity.
5. After setting the capacity, move to Create Volume.
6. After completing, you'll be brought back to the Intel(R) Rapid Storage Technology screen. Under RAID
Volumes
Enter the Intel ®
Steps:
1. In BIOS Setup, go to BIOS and set CSM Support to Enabled and Storage Boot Option Control toLegacy.
Save the changes and exit BIOS Setup. After the POST memory test begins and before the operating system
2.
Create RAID Volume in MAIN MENU
3. After entering the CREATE VOLUME MENU screen, enter a volume name with 1~16 letters (letters cannot
4. Under Disk
they will be automatically assigned to the array. Set the stripe block size if necessary. The stripe block size
5.
6.
Select Disks.
MAIN MENU
Name
6. Exit in MAIN MENU.
- 39 -
Create RAID Volume to enter the
Create Volume item to begin
DISK/VOLUME INFORMATION