Answering Calls - Hitachi SH-P300 Online User's Manual

Answering Calls

Make sure your phone is on. If your phone is off, incoming calls go to
1.
voicemail.
When a call comes in, answer the call by pressing T. Depending
2.
on your settings, your PCS Phone notifies you of incoming calls in the
following ways:
The phone rings and/or vibrates.
The LED flashes.
The backlight illuminates.
The screen displays an incoming call message and animation.
If available, the phone number of the caller is displayed.
If the phone number is in your Internal Phone Book, the Phone Book
entry's name is displayed.
You can perform the following when you have an incoming call.
Press T to answer incoming calls.
Press E to put the caller on hold.
Move the cursor key upward or downward to change the ringer volume.
Press E twice very quickly to cancel the call.
Depending on your settings, you may also answer incoming calls by
pressing any digit. (To answer a call when you are roaming and Call
Guard is enabled, you must press
"Controlling Roaming Charges Using Call Guard" on page 59.)
Note:
If your phone is off, incoming calls go to voicemail.
To disconnect the call, press E.
3.
to answer the call. See
OK
Section 2: Understanding Your Phone
2A: Your PCS Phone – The Basics 27