Accessing The Security Menu; Locking Your Phone - Hitachi SH-P300 Online User's Manual

Accessing the Security Menu

You must enter your lock code to view the Security menu. The lock code
consists of four digits, and the default code is the last four digits of ESN
(see the Start Here Guide) before activating your phone, and then after,
the last four digits of your phone number.
To access the Security menu:
From the Standby mode, press the center of the cursor key to display
1.
the top menu.
Select the
2.
Highlight
3.
Enter lock code. (Press B to erase single digit.)
4.
Digits are replaced by * on the display.
Tip:
If you cannot recall your lock code, try using the last four digits of
either your Social Security number, ESN or PCS Phone Number or try
0000. If none of these work, call PCS Customer Service Solutions at 1-
888-211-4PCS(4727).

Locking Your Phone

When your phone is locked, you can only receive incoming calls or make
calls to 911, PCS Customer Service Solutions or special numbers. All
other functions of the phone are disabled.
To lock your phone:
From the Security menu, highlight
1.
Depending on your preference, highlight either
2.
Power-up
Lock Now
On Power-up
Press
OK
3.
Section 2: Understanding Your Phone
50 2C: Setting Your Phone's Security
icon and press
Settings
and press
Security
, and press .
OK
to lock your phone immediately.
to lock your phone every time the phone is turned on.
.
.
OK
.
OK
Lock Phone
and press .
OK
or
Lock Now On