Pcs Message Storage; Dialing A Phone Number From A Pcs Message; Connecting To A Url From A Pcs Message; Sending An E-Mail To The E-Mail Address From A Pcs Message - Hitachi SH-P300 Online User's Manual

To display a PCS Message from the main menu:
From the Standby mode, press
1.
Highlight
2. Messaging
Highlight
3. Notifications
Highlight the message you want to view and press
4.
Tip:
While displaying a message, you can display the next message
(when you have one) by pressing
Move the cursor key left displays the previous message.

PCS Message Storage

Your PCS Phone can store up to 100 PCS Messages. When your phone
reaches its PCS Message capacity, it automatically deletes the oldest
messages as new messages arrive.

Dialing a Phone Number From a PCS Message

To dial a phone number contained in the message:
After you display a PCS Message, highlight the phone number you
wish to call and press

Connecting to a URL From a PCS Message

To connect to the URL contained in the message:
After you display a PCS Message, highlight the URL you wish to display
and press
Go
Sending an E-mail to the E-Mail Address From a PCS
Message
To send an e-mail to the e-mail address contained in the message:
After you display a PCS Message, highlight the e-mail address you wish
to send an e-mail and press
settings, then the PCS Email compose screen displays.
and press
and press
Next
. Then press T.
Call
.
Mail to
Section 3: Using PCS Service Features
to display the main menu.
Menu
.
OK
.
OK
or move the cursor key right.
. If you have not yet set e-mail
.
View
3B: PCS Vision 163