Setting Up A Web Connection - Hitachi SH-P300 Online User's Manual

Setting Up a Web Connection

Getting Started
Your PCS Phone allows you to connect to a laptop PC to send and receive
e-mail, access the Internet or your company's network and more, without
searching for a wall-mounted telephone jack. In just three steps, you can
use your connectivity:
First, you'll need a PCS Connection Kit (sold separately).
1.
Connect your laptop PC to your PCS Phone by using the USB data
2.
cable.
Finally, take a few minutes to install the PCS Connection Manager
3.
Software onto your computer using the CD.
For complete details on how to install and use the software, refer to the
user guide in the PCS Connection Kit you purchased.
Placing a Data Call
To place a data call while you're connected to the Web:
First, make sure the cable is connected properly.
1.
Open the PCS Connection Manager
2.
place the call.
Once the call successfully connects, your phone's display shows you
information on the status of the data call.
Ending a Web Call
It's important to note that some of the normal ways to end a call won't
work with Web Connection calls. You should always close the connection
through the application on your computer. Your phone will then return
to Standby mode.
Section 3: Using PCS Service Features
160 3B: PCS Vision
SM Software on your computer and
SM