Indicators On Display Panel - Hyundai H-ALMS2-07H/I Instruction Manual & Warranty Card

12.
Electric air conditioner (split system)
9. ON/OFF Button:
Push this button to start operation, push the button again to stop operation.
10. TIMER ON Button:
Press this button to initiate the auto-on time sequence. Each press will increase the auto-timed
setting in 30 minutes increments. When the setting time displays 10, each press will increase the
auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the
auto-on time to 0.0.
11. SLEEP Button:
Press this button to go into the Energy-Saving operation mode. Press it again to cancel. This
function is only can be used on COOL, HEAT and AUTO mode and maintain the most comfortable
temperature for you.
12. TIMER OFF Button:
Press this button to initiate the auto-off time sequence. Each press will increase the auto-timed
setting in 30 minutes increments. When the setting time displays 10, each press will increase the
auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the
auto-off time to 0.0.
13. LOCK Button:
When you press the recessed LOCK button, all current settings are locked in and the remote
controller does not accept any operation except that of the LOCK. Press again to cancel the LOCK
mode.
14. TURBO Button:
Active/Disable Turbo function. Turbo function enables the unit to reach the preset temperature
at cooling or heating operation in the shortest time(if the indoor unit does not support this func-
tion, there is no corresponding operation happened when pressing this button.)
EN

7. INDICATORS ON DISPLAY PANEL

2 1 3 4
4
7
Fig. 5
5 6