Advertisement
•
Connection pipe
•
Collection bag
•
Upper suction tube
•
Lower suction tube
•
Screw for mounting the suction tubes
Note: It is normal for the fuel filter to rattle when the fuel tank is empty.
Warning!
•
Stop the engine and ensure that the blower fan blades have stopped rotating before opening
the suction port cover or removing the suction tubes or blower tube. The rotating blades can
cause serious injury. The spark plug must be removed before servicing the device.
•
If the device has been delivered already assembled, repeat all steps to ensure that your device
is properly assembled and that all fastenings are tight.
•
A screwdriver is required for assembly.
Assembling the blower pipe
1.
Align the guide on the upper blow tube with the notch on the blower outlet and slide the tube in.
Note: The screw of the clamp for the pipe must be so loose that the blowpipes can be inserted into the
blower outlet. Loosen the screw by turning it counter clockwise (do not remove the screw nuts).
№
Name
1
Blower outlet
2
Adjusting spring
2. Secure the pipes by tightening the screw clockwise.
3. Align the slots on the lower blowpipe with the tabs on the upper blowpipe.
№
Name
1
Flap
2
Notch
3
Clamp screw and rabbet
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№
Name
3
Rabbet
Letter Name
A
Upper blowpipe
B
Lowe blowpiper
Item 61955
Page 7
12
2021-1
Advertisement
