Technical specifications
Engine type
Carburettor type
Displacement (㎤)
Engine power (kW)
Idle speed (
r
⁄
)
min
Max. speed (
r
⁄
)
min
Speed limit
Petrol-oil mixing ratio
Tank volume (ℓ)
Collection bag volume (ℓ)
Average air volume (㎥)
Weight (㎏)
Total dimensions (㎜)
Do not operate the machine for a longer period of time (e.g., more than half an hour) to prevent damage
from noise and vibrations. Use a slow speed as little as possible.
Storage
Storage location
Attention:
Prepare your device for storage at the end of the season or if you will not need it for more
than 30 days.
•
Allow the engine to cool and secure the device before storing or transporting it.
•
Store and fuel the device in a well-ventilated place safe from flying sparks and open flames from
devices such as water heaters, electric motors, switches, stoves, etc.
•
Store the device with all protective devices. Put the device down so that nobody can accidentally
injure themselves on sharp parts of the device.
•
Keep the device and fuel out of the reach of children.
Exterior
•
Clean your device carefully before storing it for a long period of time. Keep the device in a clean,
dry place.
•
The outer metal surfaces should be lightly oiled.
Interior
•
Remove the spark plugs and pour a teaspoon of 2-stroke (air-cooled) engine oil into the spark
plug opening. Slowly pull the starter cord eight to ten times to distribute the oil.
•
Replace the spark plug with a plug of the appropriate type and heat rating.
•
Clean the air filter.
•
Check the entire device for loose screws, nuts and bolts.
•
Replace any damaged, brittle, or worn parts of the device.
•
Always start the new season with fresh fuel in the correct petrol-oil ratio.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Air-cooled two-stroke engine (1E34FF)
Diaphragm
26
0.8
2800 ± 200
7500
None
1:40
0.5
50
0.17
5.8
580 × 290 × 390
Item 61955
Page 17
12
2021-1