Advertisement
Adjusting the carburettor
The carburettor was precisely adjusted in the factory. An adjustment of the idle speed may be necessary
under the following conditions. The engine does not go into idle when the hand throttle is released.
Adjusting the idle
Let the device idle. Adjust the idle speed so that the machine runs without stopping (idle speed too low).
•
Turn the idle speed screw clockwise to increase the engine speed if the engine stops or dies.
•
Turn the idle speed screw counter-clockwise to decrease the engine speed.
Nr.
Name
1
Idle regulator
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Nr. Name
2
Air filter cover
Item 61955
Page 16
12
2021-1
Advertisement
