Advertisement
Operation Manual
PREPARATION BEFORE RUNNING
Raise the front cover, and then install the air filter.
MANUAL OPERATION (COOLING, DEHUMIDIFICATION, FAN)
T.SETTING
T.SETTING
ＯＮ／ＯＦＦ
Ｈ．Ｐ．
ＳＬＥＥＰ
ＦＬＡＰ
ＯＮ
ＯＦＦ
ＣＬＲ
ＳＥＴ
ＳＥＮＳＯＲ
ＢＡＴＴＥＲＹ
C
2
ＴＥＭＰ．
3
ＭＯＤＥ
1
ＦＡＮ／ＭＵＴＥ
ＲＥＳＥＴ
Basic operation
1.Before running the appliance, press the "MODE" for selection
one mode of the dehumidification, cooling and fan.
2.Press the "ON/OFF" button to start the appliance.
3.Press the "TEMP." button to set the temperature you wish.
COMMONSENSE
●A certain period of time is required to reach the desired
temperature since the air of room cycles all the time.
● When appliance works in cooling and dehumidification
mode, if blocked by accumulated water drops, then air
filter should be cleaned and air fresh filter should be
cleaned or replaced.
9
Advertisement
