Firmware Update; Pxeboot Update - Logicube ZXi-10G User Manual

6.4 Firmware Update

ZXi-10G software releases may contain a firmware update. This section provides instructions on how
to check if a firmware update is required, and how to perform the firmware update.
After the software is updated/re-installed on the ZXi-10G, tap/click Software Updates on the
1.
left side.
2. Tap the Firmware Update tab. One of two screens will appear:
a. FIRMWARE UPGRADE AVAILABLE – Tap Update. A message will appear: "FIRMWARE
UPDATE COULD TAKE UP TO A FEW MINUTES TO COMPLETE; PLEASE DO NOT
INTERRUPT POWER DURING THIS TIME. ON COMPLETION THE UNIT WILL AUTO-
RESTART AND CONFIRM THE UPDATE." Tap OK to start the firmware update process.
b. FIRMWARE UPGRADE NOT AVAILABLE – This message will appear if the device does not
require a firmware update. No further action is necessary if this message appears.

6.5 PXEBOOT UPDATE

This screen is reserved for future use.
Logicube ZXi-10G™ User's Manual
When the OK icon is tapped, the screen may appear to do
nothing. Do not keep tapping the OK icon. The firmware
update will take no more than 60 seconds. When the firmware
update finishes, the ZXi-10G will reboot automatically.
UPDATING THE SOFTWARE AND FIRMWARE
83