Table of Contents
Advertisement
Entering Network Parameters
From the GUI's main menu bar, Click EDIT>CONFIGURE>NETWORK. The screen of below
appears. Make sure the basic network parameters have been entered.
Disable Network: uncheck
Host Name: (Any name will suffice, but since this name appears on each line of the Image Server's
diagnostic logs, it is a good idea to keep this short.) The name should also be unique from other
devices on the network.
If "Use DHCP" if not checked, then enter a fixed IP address compatible with your local subnet. For
example,
IP Address:
Net Mask:
Default Router:
The Name Servers and NTP Servers fields provide the information needed to reach the public time
servers.
The NTP Servers field contains a list of time servers, either by numeric IP address, or by site name
(URL). Entries are separated by spaces.
Image Server 2000 Owner's Manual
All manuals and user guides at all-guides.com
Figure 29 - Network Configuration Screen
192.168.1.20
255.255.255.0
192.168.1.1
Page 77
Advertisement
Table of Contents
