Home Connect Settings; Remote Diagnostics; About Data Protection; Declaration Of Conformity - Siemens iQ700 Instruction Manual

Home Connect
en
Activating remote start
Press the menu button.
1.
Touch "Remote start".
2.
appears in the display.
C

Home Connect settings

You can adjust Home Connect to suit your
requirements at any time.
Basic setting
WiFi
Network
Connect to app
Remote control
Appliance information l

Remote diagnostics

Customer Service can use Remote Diagnostics to
access your appliance if you contact them, have your
appliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
For further information and details about the
Note:
availability of Remote Diagnostics in your country,
please visit the service/support section of your local
website: www.home-connect.com

About data protection

When your appliance is connected for the first time to a
WLAN network, which is connected to the Internet, your
appliance transmits the following categories of data to
the Home Connect server (initial registration):
Unique appliance identification (consisting of
■
appliance codes as well as the MAC address of the
installed WiFi communication module).
Security certificate of the WiFi communication
■
module (to ensure a secure IT connection).
The current software and hardware version of your
■
domestic appliance.
Status of any previous resetting to factory settings.
■
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Ensure that the Home Connect functions can be
Note:
used only in conjunction with the Home Connect app.
Information on data protection can be accessed in the
Home Connect app.
24
Possible settings
Switching on/off
Connecting to the network/
disconnecting from the net-
work
on/off
You will find the Home Connect settings in your
Note:
appliance's basic settings. Which settings the display
shows will depend on whether Home Connect has been
set up and whether the appliance is connected to your
home network.
Explanation
You can switch the wireless module on and off. If WiFi is activated, you can use the Home
Connect function. The appliance requires max. 2 W in networked standby.
Switch the network connection on or off as required (e.g. for holiday).
The network information will be retained after the appliance is switched off. After switch-
ing on the appliance, wait for a few seconds while it reconnects to the network.
Start the connection process between the app and the appliance.
Use the Home Connect app to access the appliance's functions. When it is deactivated,
only the operating statuses are displayed in the app.
The display shows the network and appliance information.

Declaration of Conformity

BSH Hausgeräte GmbH hereby declares that the
appliance which features Home Connect is in
accordance with the basic requirements and the other
relevant provisions of the directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.siemens-home.bsh-group.com on the
product page of your appliance with the additional
documents.
2.4 GHz band: max. 100 mW
5 GHz band: max. 100 mW
BE
ES
y
HU
SK
5 GHz Wi-Fi: for indoor use only
BG CZ DK DE
FR HR IT CY
MT NL AT PL
FI SE UK NO
EE IE EL
LV LT LU
PT RO SI
CH TR