Table of Contents
Advertisement
Microwave
en
Microwave power settings
The microwave power settings are levels and do not
always correspond to the exact wattage that the
appliance uses.
The following microwave power settings are available.
Micro-
Maximum cooking
wave set-
time
ting
90
1 hour 30 mins
180
1 hour 30 mins
360
1 hour 30 mins
600
1 hour 30 mins
1000
30 minutes
--------
Default values:
The appliance provides a default cooking time for each
microwave setting. You can accept this value or change
it in the appropriate area.
The maximum setting is for heating liquids. After a
certain period, the microwave's power output is reduced
to below maximum to protect the appliance. The
microwave's full power is available again after a cooling
period.
Time setting intervals
The interval for setting the cooking time changes with
the length of the cooking time.
Cooking time
0 - 1 minute
1 - 3 minutes
3 - 15 minutes
15 minutes - 1 hour
1 hour - 1 hour 30 minutes
Setting the microwave
Example: Microwave setting 600 W, cooking time
5 minutes.
Use the function selector to select the microwave
1.
function ß.
The appliance is now ready to use. The maximum
microwave power output · will be displayed as the
default value on the display. You can change this at
any time.
Touch the microwave setting field to select the
2.
power setting you require.
18
Use
For defrosting food that deterio-
rates easily in terms of quality.
For defrosting and continued
cooking.
For cooking meat and for heat-
ing food that deteriorates easily
in terms of quality.
For heating and cooking food.
For heating liquids.
Interval
5 seconds
10 seconds
30 seconds
1 minute
5 minutes
The microwave setting will be highlighted and a
default cooking time will be shown on the display.
Use the rotary selector to set the required cooking
3.
time.
You can also set the cooking time first and
Note:
then the microwave setting.
Touch the u button.
4.
The time remaining will count down on the display.
The u LED will be lit.
The cooking time has elapsed
An audible signal sounds. Open the appliance door or
touch any field.
Changing the cooking time
Use the rotary selector to change the cooking time.
After a few seconds, the change is applied.
Changing the microwave power output
Touch · until the required level is selected in the
display.
Notes
Touching it several times switches the power levels
■
from the highest to the lowest level.
If the microwave function is only added after the
■
start, the appliance pauses. Press u to start
operation
Advertisement
Table of Contents
