Table of Contents
Advertisement
14 Basic settings
You can configure the basic settings for your appliance to meet your needs.
14.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Factory setting (may vary according to model)
1
14.2 Changing basic settings
Requirement: The appliance is switched off.
Press and hold the
1.
four seconds.
a The first basic setting appears in the display,
e.g. .
Use the
or
button to change the setting.
2.
3.
Use the
button to switch to the next basic setting.
15 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
15.1 Cleaning agent
To avoid damaging the different surfaces of the appli-
ance, do not use unsuitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
Do not use aggressive or abrasive cleaning agents.
▶
Basic setting
Clock display
Signal duration upon completion of a
cooking time or timer period
Acoustic signal when a button is
pressed
Cooling fan run-on time
Waiting time until a setting is adop-
ted
Childproof lock can be adjusted
→ "Childproof lock", Page 20
button for approx.
Selection
= hide the time
= display the time
= 10 seconds
= 30 seconds
= 2 minutes
= off
1
= on
= short
= medium
= long
= extra long
= 3 seconds
= 6 seconds
= 10 seconds
= no
= yes
To save the changes, press and hold
4.
four seconds.
Note: Following a power failure, the factory basic set-
tings are restored.
14.3 Discarding changes to the basic
settings
Turn the function selector.
▶
a All changes are discarded and not saved.
Do not use cleaning products with a high alcohol
▶
content.
Do not use hard scouring pads or cleaning
▶
sponges.
Do not use any special cleaners if the appliance is
▶
still warm.
Using oven cleaner in a hot cooking compartment
damages the enamel.
Do not use oven cleaner in the cooking compart-
▶
ment when it is still warm.
Remove all food remnants from the cooking com-
▶
partment and the appliance door before you next
heat up the appliance.
New sponge cloths contain residues from production.
Wash new sponge cloths thoroughly before use.
▶
Basic settings en
1
1
1
1
1
for approx.
21
Advertisement
Table of Contents
