Table of Contents
Advertisement
Requirement: The cooking compartment has cooled
down.
1.
Open the appliance door and absorb the residual
water with an absorbent sponge cloth.
Clean smooth surfaces in the cooking compartment
2.
with a dish cloth or a soft brush. Remove stubborn
residues with a stainless steel spiral scourer.
17 Rails
To clean the rails and cooking compartment thor-
oughly, you can remove the shelf supports.
17.1 Unhooking the rails
WARNING ‒ Risk of burns!
The rails can be very hot.
Never touch the rails when they are hot.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Hold the bottom of the shelf support and pull it
1.
slightly towards the front. Pull the extension pins in
the lower section of the rails out of the mounting
openings.
Pull the entire shelf support downwards first and
2.
then pull it forwards and remove it.
Remove limescale deposits using a vinegar-soaked
3.
cloth. Wipe this away with clear water and use a soft
cloth to also rub underneath the door seal dry.
Once the cooking compartment is sufficiently clean:
4.
In order to cool the cooking compartment, leave
‒
the appliance door open in the detent position
for approx. one hour.
To dry the cooking compartment more quickly,
‒
heat up the appliance with the door open with 3D
hot air and 50 °C for approx. five minutes.
17.2 Attaching the rails
Place the two hooks at the top of the rail into the up-
1.
per holes.
2.
ATTENTION!
Incorrect assembly
Never move the rail before the two hooks are se-
▶
cured fully in the upper holes. Otherwise the
enamelled coating may be damaged and break.
Both hooks must be inserted fully into the upper
3.
holes. Move the rail down slowly and carefully, and
hook it into the lower holes.
Rails en
25
Advertisement
Table of Contents
