Toshiba MMU-AP0071YHPUL Service Manual page 49

<RBC-AMS5*E-UL>
1
Push the [ MENU] button to display the menu screen.
2
Push and hold the [
the "Field setting menu".
→ Push and hold the buttons for more than 4 seconds.
3
Push the [
screen, then push the "
→ The fan and louver of the indoor unit operate.
When the group control is used, the fan and louver of the selected indoor unit operate.
→ Move the cursor to select "Code(DN)" with the "
[ ] / [
→ Move the cursor to select "Data" with the "
] / [
4
Push the [ MENU] button to set the other Code(DN) and Data. After "Continue?" is
displayed on the screen, push the "
operation.
" Setting" appears on the screen for a while, then the screen returns to the "Field setting
menu" screen.
MENU] button and the [
] / [ ] button to select "7. DN setting" on the "Field setting menu"
Set" [
Set
] button.
] button. The setup data is shown in the table below (Table 1).
] button at the same time to display
F2] button.
F2
<" [
<
F1
>" [ F2] button, then set "Data" with the [
>
F2
No" [ F2] button to finish the setting
F2
No
- 49 -
F1] button, then set "0003" with the