Toshiba MMU-AP0071YHPUL Service Manual page 100

No. Part name
6 Drain pan
7
Drain pump
Procedure
1. Detachment
1) Carry out work of item 1 of ⑤.
2) Remove the cap drain and then drain the
water accumulated in the drain pan. (Fig. 12)
* When taking off the cap drain, be sure to
prepare a bucket, etc. for spilled water.
3) Loosen the fixing screw
(Ø5/32"(4mm) x 0.4"(10mm) 6 pcs.) and
then remove the drain pan. (Fig. 13)
2. Attachment
1) Tighten the fixing screw to the drain pan
with the cabinet.
2) Firmly insert cap drain to drain pan.
1. Detachment
1) Carry out work of item 1 of ⑥.
2) Remove the drain pump connector
(CN504, White, 2P) connected to the control
P.C. board and then remove the lead wire
from the clamp.
Remove the band hose from the drain hose
3)
in the direction of arrow. (Fig. 14)
4) Remove the drain hose from drain pump in
the direction of arrow. (Fig. 15)
5)
Loosen the fixing screw
(Ø5/32"(4mm) x 0.4"(10mm) 3 pcs.)
and then remove the drain pump from the
pump fixture. (Fig. 16)
2. Attachment
1) Tighten the fixing screw to the the drain pump
with the pump fixture.
2) Insert the drain hose to the drain pump.
Note :
Insert the drain hose up to the end of the drain
pump connecting part, apply band to the white
mark position of the hose.
3) Connect the drain pump connector (CN504,
White, 2P) to the control P.C. board and then
fix it as before with the clamp.
(Fig. 12)
Cap drain
(Fig. 13)
(Fig. 14)
(Fig. 15)
(Fig. 16)
Fixing screws
- 100 -
Remarks
Drain pan
Drain pan
Band hose
Drain hose
Pump fixture