Table of Contents
Advertisement
MAINTENANCE
1. Slightly lift (1) and shift (2) the clamps at the lower left and right of the door to release the
glass (A).
2. Grab the glass (A) at the bottom and gently lift (3) and shift (4) it to remove it from the upper
support.
3. The inner glass (B) (depending on the model) can be removed by carefully lifting (5) and
shifting (6) it to removing it from the lower support. Also remove the rubber spacers (C) from
the inner glass.
A
A
Install the glass in reverse order.
Install the oven door
1. Hold the door at an angle of approximately 45° in front of the oven.
2. Insert the hinges into the slots and make sure they are both positioned correctly.
3. Open the door to the fully open position.
4. Lift both hinge latches and move them towards the oven.
5. Gently close the oven door and make sure that it closes correctly. If the door does not open
or close correctly, then make sure that the hinges are positioned correctly in their slots.
4
1
2
A
C
5
3
6
B
EN 31
Advertisement
Table of Contents
