Table of Contents
Advertisement
picture and sub picture.
Press the "Volume/x" knob on the left of panel to switch the A/B layer.
PIP operation
1. Decide which source to be the main picture, select and switch it to PGM when
PIP is OFF
2. Select the PIP layout mode in PIP menu
3. Select the input source and switch it to sub-picture on PGM
4. After switching, the selected green button turns to red
After PIP mode is selected, the main picture can not be changed unless
go back to choose PIP OFF and restart the above steps.
2.3.4 FX
CHROMA KEY
L1 supports matting the Chroma Key in the menu, removing the pure color
background and overlaying it on another signal to realize the application of virtual
reality. Matting can be done on the software "Feelworld Live" or simple settings
and adjustments can be made on the device.
Seeting on the device
(1)Turn ON CHROMA KEY
(2)Select the layer need matting, Layer A is background picture, Layer B is sub
picture
(3)Select the color to be removed, there are six kinds of color: Orange, Yellow,
Green, Cyan, Blue and Purple
(4)You can adjust Max, Min and Margin according to the actual need. The range
is form0 to 2880.
3. Switch Input Source
After selecting transition effect and switch mode
. Under Fast+Time mode, pushing green button will switch the input source in
1
the selected time with set transition effect. After switching, green turns to red.
. Under T-Bar mode, pushing green button, it will flash and push T-Bar to the
2
13
Advertisement
Table of Contents
