Table of Contents
Advertisement
ASSEMBLY
23
Check that all hardware connections
are securely installed.
Anchor the unit to the wall for safety.
The included hardware is appropriate
for drywall installation and may
require the use of a drill. If needed,
consult a qualified tradesperson or
online resources for the appropriate
steps to safely anchor this unit.
Position the unit temporarily in the
desired location. Locate the eyelets
drilled through the Top Rear Shelf
G
Support
. Mark the 2 points where
the eyelets align on the wall and move
the unit aside. Use a power drill with a
6mm or 1/4" bit to drill 2 holes as
marked. Insert the Wall Anchors
into the drilled holes and gently tap
with a mallet until almost flush with
the wall surface.
Move the unit back into place and line
up the holes in the Top Rear Shelf
Support with the Wall Anchors. Insert
5
a Screw
through each eyelet and
tighten securely into the Anchors.
Hardware Used:
Contact us for assistance: (866) 985-7877 | www.balkenehome.com
?
5
Screw 4x50mm x 2
?
Wall Anchor x 2
Your Greenwich Storage Shelf is ready for use!
5
A
5
a
b
c
d
5
11
Advertisement
Table of Contents
