Troubleshooting Guide - Haier 34F9K Owner's Manual

Colour tv receiver
Hide thumbs Also See for 34F9K:
Table of Contents

Advertisement

Troubleshooting guide

To assist in location possible faults use help guide below
BREAKDOWN PHENOMENON
PICTURE
Picture with snow
Double or Triple Image
Disturb
Normal
No Picture
No colour
Scramble
Colour Spot
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the
materials in the cabinet expanding with room temperature changes.
24
SOUND
The aerial direction and connection
Noise
This is called ghosting which can be minimized with
an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimize this effect.
Normal
Electrical interference which can be caused
by cars, motorbikes etc, Fluorescent lamps
and dirty insulators on overhead power
cables.
Noise
Volume Sound mute
No sound
Ensure that the power supply is connected to the TV
set and turned on. Also ensure that the TV set is not
in "Listen Mode" or that the brightness and contrast
are not turned down.
No sound
Adjust colour control
Normal volume
Adjust channel again
Normal or Weak Volume
Colour Purity fault which can be caused by moving
the TV set, placing magnets near the TV screen or
turning on/off house hold appliances such as vacuum
cleaners near the TV set. Turn the TV off with the
mains power switch for 15 minutes. When the power
Normal volume
is turn on again the TV set will automatically degauss
the picture. In server cases leave the TV set turned
off over night.
.
CHECKING

Advertisement

Table of Contents
loading

Table of Contents