Operation - U-Line RIPACK 3000 Assembly Instructions Manual

NOTE: The heat gun works with propane gas
in gas phase, contained in tanks of different
capacities. Use the largest tanks available.
Always connect and disconnect the tanks away
from flames and ignition points. For all work
inside professional workshops, the tank must be
placed on a mobile trolley that can be easily
maneuvered.
1. Connect regulator to propane tank. Thread
counterclockwise onto tank. Tighten with a wrench.
(See Figure 1)
2. Connect one end of the hose to regulator. Tighten
counterclockwise with the included wrench.
(See Figure 2)
3. Connect other end of hose to the heat gun. Tighten
counterclockwise with the included wrench.
(See Figure 3)
4. Turn valve 45° counterclockwise to open propane
tank. (See Figure 4)
PAGE 2 OF 15

OPERATION

Figure 1
Figure 2
Figure 3
Figure 4
0122 IH-4693