Table of Contents
Advertisement
manufacturer if you encounter any anomalies.
Any attempt to dismantle, modify or tamper with any part of the machine by the
user or unauthorised personnel will immediately void the Declaration of
Conformity drawn up pursuant to Directive UL 763-CSA 22.2 and the warranty,
and relieves the manufacturer of any liability for damages deriving from such
action.
The manufacturer is also relieved of all liability for the consequences of:
-
incorrect installation;
-
improper use of the machine by inadequately trained personnel;
-
use of the machine in breach of local regulations;
-
lack of or negligent maintenance;
-
use of non-original spare parts, not specified for the model in question;
-
total or partial failure to follow the instructions.
1.4 - Machine description
The pasta machine you have purchased is a straightforward, compact machine
guaranteeing powerful operation and high performance.
-
Since it must be used to produce food products, all components that can come
into contact with such products have been carefully chosen to guarantee the
utmost hygiene.
-
The bowl is made of 6060 anodised aluminium alloy and grade AISI 304
stainless steel.
-
The accessory tool (blade) is made of grade AISI 304 stainless steel.
-
The mouth and the screw are made of AISI 304 stainless steel and ø75 dies of
bronze.
-
Two operating modes: kneading and extruding mode.
-
Maximum dough capacity of 4.2 kg (3 kg of flour + 1.2 kg of eggs).
-
Possibility of adding the pasta cutter accessory.
-
Single-phase ventilated motors offering the following advantages:
-
extremely constant performance and motor duration;
-
longer actual work time thanks to fewer interruptions.
The models appearing in this manual are manufactured in conformity to Directive
UL 763-CSA 22.2 and subsequent amendments.
If any accident occurs, the manufacturer shall not be held liable if the machine was
modified, tampered with, with its safety guards removed or used for purposes other
than the intended use specified by the manufacturer.
1.5 - Intended use
The machine is designed to produce fresh-made pasta.
It must be used in a professional setting by qualified operators who have read and
understood this manual. Use the machine exclusively when it is securely placed on
a solid worktable.
After every work cycle, we recommend leaving the machine to rest for a few
minutes before using it again.
1.6 - Improper use
The machine must only be used for its intended purposes; in particular:
5
Advertisement
Table of Contents
