Care And Cleaning; Washing The Outer Surface Of The Product; Washing The Inside Of The Appliance; Cleaning The Filters - Beko BDFN Series Manual

7- Maintenance and cleaning
First of all, read the "Safety
instructions" section!
Unplug the product and turn
off the tap before beginning
cleaning procedures.
Do not use abrasive substances for
cleaning.
Clean the filter and spray arms at
least once a week to keep the
machine working properly.
The life of the product is extended and
frequently encountered problems are
reduced if it is cleaned regularly.
Washing the outer surface of the
product
REMARK Wash the exterior surface and
door handles of the product gently
with a mild detergent and a damp
cloth. Wipe the "control panel" with a
damp cloth.
Washing the inside of the device
•
Every month clean the inside of the
machine by running the machine in
the program operating at the
highest possible temperature with
detergent or special cleaning
agents for the machine. This
operation will remove residues and
limescale from inside the machine.
•
If there is still water in the machine,
drain the water following the procedure
described in the section "Cancelling a
programme". If the water cannot be
drained, remove the filters as specified
in the "Cleaning the Filters" section and
check if deposits have accumulated at
the bottom of the machine, blocking the
water channel. Clean if necessary.
Filter cleaning
Clean the filters at least once a week
for the device to work properly. Check
for food residue on the filters. If there
are food residues on the filters, remove
them and clean them well under
running water. 1. Turn the micro-filter
assembly (1) and coarse filter assembly
(2) anti-clockwise and remove it
from its location. (varies
2. Remove the metal/plastic filter (3)
3. Press the two catches of the
coarse filter inwards and
separate the coarse filter from
the assembly.
39/EN