Kreg KMA3225 Owner's Manual page 10

Marking Drawer Slide Mounting Holes
a. Mark the desired center line of the drawer slide on the cabinet.
b. Position the jig (A) using the position indicator window to align the drill guide
hole.
c. Clamp the jig to the frameless cabinet.
Important To use the provided screws from the slide manufacturer, only use the drill
bit to mark the location of the screws.
d. If using a standard
wood screw, bring your
drill up to speed and
lightly touch the cabinet
to break the surface.
f. Attach the slide with the first screw and level to attach the remaining screws.
10
e. If using a 5 mm
system screw, use
the 5 mm drill bit to
drill the hole.
A