iUP-200/201A
INPUT DATA
FROM HOST
SYSTEM FILE*
FILE
' MUST BE IN INTEL 8080
HEXADECIMAL FORMAT.
' SHADED AREAS INDICATE
DATA PRESENT.
Figure 3-2 SHIFT-LOAD 3 Function Data Manipulation
The load operation is then terminated. Try downloading the data again. If you get
the CHECK SUM ERROR message a second time, recreate the data.
If the data being read does not match the Intel 8080 hexadecimal file format, the
following error message is displayed:
ILLEGAL FILE TYPE
The load operation is then terminated.
When the end of file is reached, the following message is displayed:
END OF FILE
The message indicates that the operation is completed. Press the CLEAR key to
return to the IUP READY prompt.
INPUT
MAPPED
BUFFER
STRUCTURE'
Off-Line Operation
3-11