iUP-200A/201A
Security Group
The following security group command programs selected devices to prevent
unauthorized access.
KEYLOCK Interactively prompts for any related parameters and locks the
Summary of Off-Line Functions
The iUP-201A function keys manually control the manipulation and transfer of
data between the URAM and PROM devices. These keys perform the following
functions:
ON-LINE
ROM TO RAM
VER
PROG
DEVICE SELECT Selects the type of PROM device.
CLEAR
ENTER
SHIFT
ADDR-0
SHIFT
DATA-1
SHIFT
FILL-2
SHIFT
LOAD-3
SHIFT
LOCK-4
Chapter 3 describes the iUP-201 A function keys.
device from access.
Selects on-line or off-line operation.
Loads PROM data into the URAM.
Verifies PROM data against URAM data.
Programs the PROM with URAM data.
Clears entry or terminates the current off-line function.
Enters addresses, data, and baud rates.
Selects data display function.
Selects modify data function.
Fills a selected address range in URAM with a constant.
Loads URAM with data in Intel 8080 hexadecimal file
format, down-loaded from a host system through
an RS-232 interface.
Locks the EPROM device from unauthorized access.
General Information
1 -9/1-10