Personality Module; Iup-201 A Universal Programmer With - Intel iUP-200A User Manual

iUP-200A/201A
further information on connecting the universal programmer to a host.) A dedicat­
ed Intel 8085 microprocessor with its own RAM and firmware allows the universal
programmer to perform many operations independently of the host.
The universal programmer is housed in a low-profile case with an angled front
panel. The ON/OFF switch is located on the back panel, and a POWER ON indica­
tor light is located on the front panel.
Air convection through vents at the rear, top, and bottom of the case cool the unit.
The left side of the front panel can hold a personality module. Figure 1-1 shows
the basic iUP-200A universal programmer with an uninstalled personality module.
The iUP-201A universal programmer is identical to the iUP-200A universal pro­
grammer except that it has the off-line option installed. Figure 1-2 shows an
iUP-201 A universal programmer with a personality module installed.
The hand-sized personality modules plug into the universal programmer. Each
personality module has one or more device sockets which hold PROMs for
programming. LEDs on the personality module indicate the PROM type selected
and the socket to use.
The off-line option of the iUP-201 A universal programmer occupies the right half
of the front panel and consists of an alphanumeric display and a keyboard.
The alphanumeric display has labeled fields for command, address, and data. The
keyboard section contains a numeric (hex) keypad and function keys. The off-line
option also adds 32K of user-accessible RAM (URAM).
The back panel of the universal programmer (shown in Figure 1-3) is the same for
both the iUP-200A universal programmer and the iUP-201A universal
programmer. The main power switch is a rocker switch located in the upper left
Figure 1-2 iUP-201A Universal Programmer with an Installed Personality Module
General Information
1-3