Introduction; Product Information - Daktronics PROLINK ROUTER 605 Series Installation And Maintenance Manual

1

Introduction

This manual is intended to help Daktronics customers operate the ProLink Router (PLR)
605X and 615X. Use this document only under the guidance of Daktronics personnel.

Product Information

The PLR605X is a component mounted on a plate inside the display. It receives a ProLink6
signal from the display control system and converts it to a ProLink5 or ProLink8 signal that
is sent out to a node. This manual refers to nodes as modules but they could also be
freeform elements. For information on specific PLRs, refer to PLR6050 (p.2),
ProPixel
®
PLR6051 (p.5), PLR6052 (p.7), PLR6053 (p.10), or PLR6054 (p.13).
The PLR615X operates the same as the PLR605X except that it uses dual coax cable
connectors for the ProLink6 interface instead of dual fiber cable connectors. Refer to
Figure 2 and PLR615X (p.16).
7-Segment display
ProLink6 RJ45 Jack A (in)
ProLink6 RJ45 Jack B (out)
Program jack
Figure 1: PLR6052 ProLink Router
ProLink6 coax Port A
Figure 2: PLR615X ProLink Router
ProLink6 fiber Port A
Power jack
Program jack
Introduction
ProLink6 fiber Port B
Fan on/off jack
1
Power jack
ProLink5 SATA Port A
ProLink5 SATA Port B
Fan on/off jack
CAN jack
ProLink5 SATA Port A
ProLink5 SATA Port B
ProLink6 coax Port B