Plr615X Status Leds - Daktronics PROLINK ROUTER 605 Series Installation And Maintenance Manual

Code Description
F 0 A Temperature error
F 0 B ID error
F 0 C Serial flash error
F 0 D EPLD error
F 0 E EPLD oscillator error
F 0 F EEPROM error
F 1 0 Firmware error
F 1 1 ProLink5 configuration error
F 1 2 7-Segment display error
F 1 3 VIN voltage error
F x x Other self-test error

PLR615X Status LEDs

Status information is shown on the four status LEDs labeled ERR, 0, 1, and 2. To the left
of the status LEDs, there is a heartbeat LED labeled HB. The HB indicator LED toggles at
a rate of once per second when the PLR is in normal operation or self-test mode and
toggles at a rate of 10 times per second when the PLR is in bootstrap mode. Refer to
Figure 30.
Status LEDs
Figure 30: PLR615X
Power jack
Ch 0 Ch 1 Ch 2 Ch 3
ProLink6 coax Port A
Diagnostics & Troubleshooting
31
ProLink5 SATA Port A
ProLink5 SATA Port B
ProLink6 coax Port B