Power Up Sequence; Normal Operation - Daktronics PROLINK ROUTER 605 Series Installation And Maintenance Manual

Power Up Sequence

The following table lists power up sequence codes shown on the 7-segment display.
Code Description
8 8 8 7-segment display test (held for two seconds)
u P t Micro firmware type to follow
x Micro firmware type, Digit 1
x x x Micro firmware type, Digits 2-4
u P r Micro firmware revision to follow
x Micro firmware revision, Digit 1
x x x Micro firmware revision, Digits 2-4
u P b Micro firmware build to follow
x Micro firmware build, Digit 1
x x x Micro firmware build, Digits 2-4
E P t EPLD firmware type to follow
x EPLD firmware type, Digit 1
x x x EPLD firmware type, Digits 2-4
E P r EPLD firmware revision to follow
x EPLD firmware revision, Digit 1
x x x EPLD firmware revision, Digits 2-4
i d Hardware ID to follow
x Hardware ID, Digit 1
x x x Hardware ID, Digits 2-4

Normal Operation

The following table lists codes that are shown on the 7-segment display during normal PLR
operation.
Code Description
Blank
A d r ProLink6 address to follow
x ProLink6 address, Digit 1
x x x ProLink6 address, Digits 2-4
t PLR temperature to follow
x x PLR temperature in degrees Celsius
Diagnostics & Troubleshooting
24