Spares Information - Beko Drypoint ACC 4 Instruction/Technical Manual

Section 11: Spares Information
Spares
Purge Plug Identification
Each dryer is set with the appropriate purge plug for the operating pressure specified at point of order. The purge plug fitted on
the unit will be identified on the purge plug label, located underneath the rating plate on the right. If the inlet pressure to the dryer
is adjusted to operate at an alternative working pressure other than initially specified, please contact the manufacturer and order
an appropriate purge plug (identified in the table below). Before operating at the new working pressure this purge plug must be
installed into the dryer. Failure to comply with these instructions could result in component failure and affect any warranty claims.
Purge Plug Identification
Model Operating Pressure psig (barg)
58 (4) 72.5 (5)
PPK008 PPK008
ACC 4
PPK011 PPK010
ACC 6
ACC 8 PPK012 PPK011
ACC 10 PPK013 PPK012
PPK015 PPK014
ACC 15
PPK02.1 PPK01.9 PPK01.8 PPK01.7 PPK01.6 PPK01.5 PPK01.4 PPK013
ACC 25
ACC 35 PPK028 PPK023
Appropriate purge plug selection is very important for function of the
dryer. Failure to comply with this may affect your warranty.
Heatless Desiccant Dryers |
87 (6) 101.5 (7) 116 (8)
PPK007 PPK007 PPK006.5 PPK006.5 PPK006
PPK009 PPK008 PPK007.5 PPK007.5 PPK007.5 PPK007
PPK010 PPK010 PPK009
PPK011 PPK011 PPK010
PPK013 PPK013 PPK012
PPK021 PPK020 PPK018
Instruction Manual
130.5 (9) 145 (10) 159.5 (11)
PPK006
PPK008 PPK008 PPK007.5 PPK007.5 PPK007.5 PPK007
PPK009 PPK009 PPK009 PPK008.5 PPK008.5 PPK008.5 PPK008
PPK011 PPK011 PPK010
PPK018 PPK016 PPK015
174 (12) 188.5 (13) 203 (14)
PPK006 PPK006 PPK005
PPK007 PPK007 PPK006.5 PPK006.5 PPK006.5
PPK010 PPK010 PPK009
PPK013 PPK012 PPK012
PPK015 PPK014 PPK014
217.5 (15) 232 (16)
PPK005 PPK005
PPK007 PPK007
PPK008
PPK009 PPK009
PPK012 PPK012
PPK014 PPK014
47