Warranty - Beko Drypoint ACC 4 Instruction/Technical Manual

Section 12: Warranty
Warranties and liabilities
Claims for warranty and liability concerning personal injury or
material damage are excluded if they resulted due to one or
more of the following factors:
• Inappropriate use.
• Inappropriate application of the dryer.
• Technically incorrect installation, start-up operation or
maintenance of the dryer.
• Operation of a known damaged dryer.
• Failure to observe the information given in this manual
concerning all life phases of the dryer.
• Undertaking constructional or operational modifications to
the dryer without prior agreement with the manufacturer.
• Inadequate monitoring and replacement of components
of the dryer that are subject to wear.
• Improper completion of repairs.
• Use of non-original or non-approved parts for service or
maintenance.
Important Note
Industrial Compressed Air Desiccant Dryers
The desiccant dryer range is designed for, warrantied and
intended for use in fixed industrial compressed air applications
only.
Use on non-fixed installations such as:
• marine (e.g. offshore, shipboard)
• transportable (e.g. portable air treatment units)
• non-fixed (e.g. rolling stock, railway etc)
are not strictly prohibited, however use in such applications is
not recommended nor endorsed as additional design features,
function testing, certification (both mechanical and electrical)
and validation may be required to satisfy relevant end user
application specific specifications and/or mandatory and
non-mandatory local, national or international standards
and legislation.
Heatless Desiccant Dryers | Instruction Manual
Such additional undertakings are the responsibility of
the package or system builder, installer or end user.
49